Drivetrain
Heavy-Duty Truck Drivetrain Parts
Transfer maximum diesel torque from the flywheel to the drive tires without vibration or power loss. We supply commercial-grade drivetrain components engineered for Eaton Fuller, Meritor, Dana Spicer, and Detroit.
Clutches & Transmission
Heavy-duty 14-inch and 15.5-inch clutch kits, clutch brakes, release forks, and transmission seals built for high-torque manual and automated platforms.
Driveshafts & U-Joints
Heavy-duty universal joints, center carrier bearings, slip yokes, and end yokes designed to eliminate driveline vibration under heavy hauling loads.
Axles & Differentials
Replacement axle shafts, pinion seals, power divider lock components, and differential bearing kits to keep your tandem drive axles running cool.
Tech Tip: Proper U-Joint Greasing & Ride Height
Repeated U-joint failures or sudden driveline vibrations at highway speeds are rarely caused by defective parts. Check these two maintenance items first:
- Purge All Four Caps: When greasing a serviceable U-joint, pump grease until fresh grease purges from all four bearing cup seals. If one cap refuses to purge, the needle bearings inside are already dry and seized—replace the joint immediately.
- Verify Rear Ride Height: An out-of-spec rear suspension leveling valve changes the operating angle of the driveshaft. Even a half-inch difference in ride height will cause severe driveline vibration and rapidly destroy U-joints and carrier bearings.

