Chassis
Heavy-Duty Truck Chassis Components
Maintain safe handling, maximum load capacity, and DOT compliance from the ground up. We supply commercial-grade chassis components—including foundation brakes, steering linkages, suspension, and wheel ends—engineered for Freightliner, Kenworth, Peterbilt, Volvo, and Mack.
Steering & Suspension
Heavy-duty tie rod ends, drag links, steering gears, air springs, and shock absorbers to keep your steer axle perfectly aligned and cargo stable.
Foundation Brakes
Complete lined brake shoe kits, air disc brake (ADB) pads, drums, rotors, slack adjusters, and air chambers for reliable commercial stopping power.
Wheel End & Drivetrain
Premium wheel bearings, oil bath hub seals, U-joints, and center carrier bearings to ensure smooth power delivery and prevent catastrophic hub failures.
Tech Tip: Don't Ignore Kingpin Wear
The kingpin is the main pivot point of your steer axle. Worn kingpin bushings will rapidly destroy expensive steer tires and cause dangerous steering wander at highway speeds:
- The Quick Test: Safely lift the steer axle off the ground. Grab the top and bottom of the tire and forcefully push and pull. If you feel any clunking or inward/outward movement, the kingpin bushings are shot.
- Preventative Maintenance: Kingpins require frequent greasing. Always jack the steer axle up slightly to take the weight off the knuckles before pumping grease. This ensures the grease actually surrounds the thrust bearing rather than just squeezing out the sides.





